cosmeticslasas.blogg.se - Best external sound card for pc speakers

#BEST EXTERNAL SOUND CARD FOR PC SPEAKERS HOW TO#
#BEST EXTERNAL SOUND CARD FOR PC SPEAKERS BLUETOOTH#

If you still don’t have any sound check the section I’ve included further below. If you don’t have sound, be sure the output isn’t muted or disabled in your computer settings. With a home receiver you can also take advantage of surround sound functions as well as rear speaker or subwoofer use, too.

Switch on power to the receiver and place it in “AUX”, “DVD”, or “CD” mode as required to use the input jacks as a source.

Connect the other end of the audio cable (RCA plugs) to the receiver’s AUX input, DVD, or CD RCA connectors.

You can optionally use a 3.5mm to RCA jack adapter then connect to a standard male to male RCA cable.

Connect the computer’s jack as shown to a 3.5mm (1/8 inch) to RCA cable adapter.

This is especially handy if you don’t have an extra set of speakers around. Connecting a computer to a home receiverĪ home stereo system often provides an AUX input feature to allow connecting to any sound source you have. (See the section further below if you don’t have sound.)ģ. Connect power to the speakers (note: some USB speakers use a USB port for power in addition to a separate audio input cable.)Īs mentioned in the section above, you may need to enable output for using external speakers which is often done within the computer’s audio chip or sound card application settings.Most PC speakers include a 3.5mm stereo cable to plug into the computer’s output jack.Using a computer speaker set one of the easiest ways to get sound, but often the quality isn’t as good as using an amplifier or home receiver & regular speakers. (See the section further below if you don’t have sound.) 2. With a computer or laptop, you may need to enable the output function in the computer’s sound settings, a sound control application, or volume mixer. Test the computer or laptop sound output with the amplifier’s volume knob (if present) slightly up.Then from there to each speaker, making sure to match the polarity as marked. Connect the positive and negative speaker wire pairs to the labeled amplifier speaker outputs.Connect the other end (RCA plugs) to the amplifier’s RCA inputs.This is an inexpensive RCA Y adapter cable with a headphone 3.5mm stereo plug on one end. Connect the output jack as shown to a 3.5mm (1/8 inch) headphone plug to RCA plug adapter.Connecting passive speakers (non-powered speakers) to a computer or laptop You’ll only need a few watts of power, so don’t worry. I used an inexpensive mini amp to drive bookshelf speakers with excellent results. If you have an old speaker set or some type of extra external speaker set handy, it’s possible to have great sound from your computer! However, if you don’t already own a home stereo receiver or amp you’ll need one. Using a mini amplifier to drive your speaker system

#BEST EXTERNAL SOUND CARD FOR PC SPEAKERS HOW TO#

DIAGRAM – How to connect stereo speakers to a computerġ.

#BEST EXTERNAL SOUND CARD FOR PC SPEAKERS BLUETOOTH#

Today’s laptops usually include a built-in Bluetooth device meaning you have another option as I’ll show you below. The headphone jack is also a stereo connector with a 3.5mm (1/8 inch) standard size.

However, most of the time the headphone jack can be used. Laptops are a different situation as they don’t normally provide a dedicated line level output jack. In some cases, the label may be a bit harder to see and you’ll need to look more closely or check the owner’s manual. The jack you need on a computer is often color-coded with green and a symbol as shown in the photo above.

A line level output provides a low-level signal that can be amplified by any amplifier, stereo receiver, or powered computer speaker set. These are provided both with an add-on sound card or the original motherboard. Pretty much all desktop PC computers have a dedicated line level audio jack. How to connect stereo speakers to a computer or laptop Which jacks should I use?